- Monochrome Continuous Laser Printer
- Non-Contact Fusing Technology
- Speed: 5,500 LPM (156 ppm, A4 2-up)
- Resolution: 600 x 600 dpi
- Printable Width: 17"
- Continuous Fanfold Media
Non-Contact Flash Fusing Technology
Most laser printers are built based on heat-pressure fusing technology, which would be problematic when printing media with glue, such as label adhesives, or uneven media surfaces. WINJET laser printers fix the toner by flash light without any contact with the media to enable printing on adhesive media.
Moreover, non-contact fusing technology ensures safety within most printing scenarios since the media will not be over-heated even if it stays in the printer during the task.
Compared with cut sheets, continuous forms are more effective in avoiding missing pages during the printing process. Also, machines usually have higher tolerance for the thickness of continuous media than that of cut-sheet media. Moreover, there are more finishing systems that work with continuous forms.
WINJET ML5500W prints at a speed of 5,500 lpm (lines per minutes, 6 lines/inch). If you are printing A4 pages 2-up, the printer will produce 156 pages per minute.
A flat paper path prevents label adhesives from peeling off during printing. It also prevents heavy media from curling up or creasing in the process.
By applying pressure instead of cutting, the auto bursting feature allows your finishing system to separate printed pages accurately at the perforation.LED Print Head
Different from conventional laser heads, the page-wide LED head of this printer enables high-speed printing and compact printer configuration.
Winjet Controller Technology
Winjet's controller technology enables users to replace old printer engines without changing the existing operation environment. Multiple emulations are available to adapt Winjet printers to current systems. Therefore, Winjet ML5500W has been a popular solution to replacing phased-out Pentax, Printronix, Ricoh and IBM continuous form printers.
|Printing Method||Electro photography process, LED array|
|Developing Method||Dry, two-ingredient developer|
|Fusing||Xenon flash and IR fusing system|
|Printing Speed||5500 LPM (6 LPI; ~156 ppm, A4 2-up)|
|Resolution||600 x 600 DPI|
|Monthly Duty Cycle||600K pages (A4 landscape)|
|Lifetime||5 years or 36,000,000 pages (A4 landscape)|
|Printable Width||Max. 17 inches|
|Media||Type||Fanfold continuous paper|
|Weight||60 to 204 g/m2|
|Width||6 to 18 inches|
|Length||7 to 14 inches|
|Paper Hopper/StackEer Capacity||3000 sheets (64 g/m2)|
|Power Requirements||Voltage 200 – 230 VAC|
|Frequency 50 Hz / 60 Hz|
|Single phase, three wires (one for FG)|
|Power Consumption||Operating: 4.0 KVA (Max.), standby: 0.6 KVA (Max.)|
|Environment||Temperature||Operating: 15 ̊C to 30 ̊C; non-operating: -10 ̊C to 35 ̊C|
|Humidity||30% to 80% (RH) (non-condensing)|
|Operation Panel||LCD panel|
|Dimensions||1360 mm (L) x 780 mm (W) x 1360 mm (H)|
|MTBF||≧ 2000 hours|
|MTTR||≦ 1 hour|