Launching Digital Color Inkjet Coding & Marking System
Color Inkjet Coding & Marking System by Winjet LabKey Features4 colors (C, M, Y, K)Adjustable printhead heightWork with various types of inkSpeed: 11 m / minResolution: 300/600 dpiDigital printing Winjet Lab is going to present a color coding and marking station at PACK EXPO 2017 Las Vegas. The system can be applied with various types of ink, such as solvent inks, water-based dye inks, pigment inks, and even edible inks. It significantly reduce the limitation on the media materials that are going to be printed on. The height of the printhead can be adjusted accoring to the surface that we are going to print. Moreover, we can design the graphics on our computers and make every single print unique!
Tractor Feed vs Roller-to-Roller
There are many reasons for choosing to print on continuous paper instead of sheet paper. For example, when printing very important documents which should be kept in serial order, continuous paper has less risk of mistakes than sheet paper. Moreover, when the print-out needs to be sent out for subsequent processing, there are more options in the market for continuous paper than for sheet paper. So, how does one choose between tractor feed and roller-to-roller printers? Tractor Feed Printers (for Fanfold Media with Sprocket Holes): Tractor feed is also referred to as pin feed. Tractor feeders of printers allow accurate printing on every page and every job, which is a desirable feature for printing on pre-printed forms. Implementing a stacker makes the system more comprehensive as the user does not need to reload the media for every job. The tractor feeder would load the media by itself, and the stacker ensures the output is properly organized. It is an ideal solution for printing scenarios with a mixture of short jobs and long jobs without requiring operator involvement. Besides labels, conventional billing printers are also tractor-feed, so such printers can be used for printing both labels and billing data. Roller-to-Roller Printers (for Paper Rolls) Roll media is usually used for line production. After printing, the whole output roll may undergo more steps in a finishing process, such as lamination, die-cutting, slitting, etc. Short-run users might simply use die-cut media in order to skip all the finishing process. However, the media needs to be marked to ensure accurate printing, and this process might increase the media cost. The following graphs show the differences between operation of pin feed and roll-to-roll printers. With pin feed printers, the operator does not need to reload the paper for a new job, whereas with roller-to-roller printers, the operator has to reload the printer once the paper is cut. Unless the working environment allows for waiting to collect "enough jobs" and printing them at once, pin feed printers usually saves much more manpower for short jobs than roller-to-roller ones! Printing labels in-house seem to be a trend. Time is money. For all operations and businesses, fast reaction is desirable in daily work and in the market. Also, printing in-house better ensures the security of the information. Therefore, pre-die-cut labels are quite popular lately. Below is a comparison between pre-die-cut fanfold media (tractor-feed/pin-feed) and pre-die-cut paper roll media: FanfoldPaper RollsPretreatment for the MediaNoneGap/black marks requiredMinimal Operator Involvement★▲Average Job LengthLess Than 100 m (~340 A4 Pages)ORandom Short Jobs★▲Billing / Statistic Data★▲
Winjet High Speed Continuous Laser Printer @ Malaysia Pack 2016
Winjet will present its highest speed printer, WINJET ML5500W, at Malaysia Pack 2016. Winjet ML5500W is a continuous form printer which can print 17" wide, which is enough for printing A4 with 2-up. Moreover, at a speed of 5,500 lpm (line per inch, 6 lines/inch), it means we can have 156 pages printed every single minute! It allows in-house printing on demands and saves time for people to do more valuable works! Malaysia Pack 2016http://www.malaysiapack.com.my/ Date: July 28- 31, 2016Location: Putra World Trade Centre (PWTC), Kuala LumpurBooth No.: 1200
Winjet Highest Speed Printer Will Attend Propak 2016 in Vietnam!
Winjet will present its highest speed printer, WINJET ML5500W, at Propak Vietnam 2016.Winjet ML5500W is a continuous form printer which can print 17" wide, which is enough for printing A4 with 2-up. Moreover, at a speed of 5,500 lpm (line per inch, 6 lines/inch), it means we can have 156 pages printed every single minute! It allows in-house printing on demands and saves time for people to do more valuable works!We will be happy to introduce it to the visitors at the show!Here is the show information:Propak Vietnam 2016http://propakvietnam.com/en/home/Date: March 1st- 3rd, 2016Location: Saigon Exhibition & Convention Center (SECC)Stand: D25 (Taiwan Pavilion)